Pembuatan Batu Bata Dengan Memanfaatkan Abu Sisa Pembakaran Limbah Kayu

Authors

  • I Gede Oka Darmayasa Program Studi Teknik Lingkungan, Fakultas Teknik, Universitas Mahasaraswati Denpasar

DOI:

https://doi.org/10.36733/jeco.v2i2.4468

Keywords:

burning ash, brick mix characteristics, wood waste

Abstract

The wood processing industry in its production process will produce a waste or waste in the form of residual ash as a result of combustion in reducing the volume of waste that occurs. However, in the combustion process will produce a residue in the form of ash. The rest of this ash if not managed properly will cause pollution to the surrounding environment. One of the efforts made by utilizing the ashes from the combustion of wood waste as building materials is by using materials in a mixture of bricks. The research was conducted by mixing the remaining ash and clay in the proportions of 0%, 5%, 10%, 15%, 20% and 25%. From the results of the mixture tested the characteristics of the mixture such as compressive strength and water seepage. The results showed that the ash from the combustion of wood waste can be used as a material for making bricks as seen from the results of the physical characteristics test of the mixture.

References

Departemen Perindustrian Republik Indonesia. Mutu dan Cara Uji Bata Merah Pejal. SNI 0021-78UDC 666.71

Bowles, Joseph. E. 1993. Sifat-sifat Fisis dan Geoteknis Tanah (Mekanika Tanah), Edisi Kedua. Jakarta: Penerbit Erlangga.

Craig, RF. 1994. Mekanika Tanah, Edisi Keempat. Jakarta: Penerbit Erlangga.

Hery Christady Hardiyatmo. 1992. Mekanika Tanah I. Jakarta: Penerbit PT Gramedia Pustaka Utama.

Terzagi, Karl. 1993. Mekanika Tanah dalam Peraktek Rekayasa, Edisi Kedua. Jakarta: Penerbit Erlangga.

Downloads

Published

2022-08-28